Home › Compliance Tags › Asset & Equipment Tags

Engraved asset & equipment tags.
Sequential numbering. Barcodes. Tamper-evident.

Custom engraved asset tags, equipment tags, industrial nameplates, and machine ID plates. Sequential serial numbering, barcode capability, tamper-evident options, and anodized aluminum with data field layouts for voltage, model, serial, and capacity. Manufactured in-house on dedicated fiber laser and CO2 laser platforms — brass, aluminum, stainless steel, and two-ply engravable laminate under one roof. Engraved in Chico since 1982.

Request a quote Call (530) 895-8448
★ 4.9 · 32 Google reviews
Engraved compliance placards produced by Recognition Products
24–48 HRS
Standard ship time
SAME-DAY RUSH
Available on request
LIVE PHONE
Real people. Always.
⚠ Placeholder — do not publish. Awaiting real industrial client quote.
"
Recognition Products handles our facility-wide asset tag program. Sequential numbering matches our inventory system, tags arrive laser-marked and ready to install, and reorders come back on the same run-of-numbers we started with years ago.
— [Client name], [Title], [Company]
Why engraved

Permanent engraved asset & equipment identification.

Engraved asset and equipment tags are permanent industrial identification cut into metal or engravable laminate. Asset tracking tags for inventory and property control, equipment nameplates with data fields for voltage and model and serial number, sequentially numbered ID tags for facility-wide programs, barcoded tags for scan-based tracking systems, and tamper-evident tags for security applications. The identification is cut into the material rather than printed on top of it, which is why engraved tags survive years of factory floor, outdoor exposure, chemical wash-down, and rough handling that destroy printed labels.

We manufacture on dedicated in-house fiber laser and CO2 laser platforms. Fiber laser marks anodized aluminum, brass, and stainless steel for the industrial environments most asset tags live in; CO2 laser engraves two-ply engravable laminate for equipment panels and cost-sensitive programs. Four substrates, one facility, no outside vendors — turnaround discipline, material consistency across reorders, and quality control at the source.

Send us your numbering scheme, data field layout, mounting requirement, and any facility standard. We come back with pricing, material recommendations, and a proof for your approval before anything ships. Reorders match the approved layout already on file.

Where these tags go

The full range of industrial asset and equipment tags.

Every manufacturing facility, utility, contractor, and multi-site operator runs on engraved industrial identification. Asset tracking, machine nameplates with data fields, sequentially numbered tag programs, barcoded ID for scan-based systems, and tamper-evident tags for security-sensitive applications — we produce every form factor, engraved to your facility standard.

Asset tracking tags
Property and inventory control tags for tools, IT equipment, furniture, vehicles, and capital assets. Sequential numbering, barcode or QR code options, and adhesive or drilled mount. Bulk-order friendly for facility-wide asset programs.
Sequential · Barcoded
Equipment nameplates
Machine and equipment ID plates with data field layouts for manufacturer, model, serial, voltage, amperage, capacity, and date. Anodized aluminum standard, brass or stainless available. Rivet, screw, or adhesive mount.
Data fields · Custom layouts
Sequentially numbered tags
Serialized runs of tags in any starting number, any range, any increment. Facility-wide asset programs, tool crib inventories, calibration tags, and inspection tags. Consistent numbering carried across every reorder.
1-∞ range
Barcoded ID tags
Code 39, Code 128, QR Code, and Data Matrix engraved directly into the tag surface — not a printed label glued on top. Scan-compatible with standard inventory and asset management systems.
Code 39 · 128 · QR · DM
Tamper-evident tags
Tamper-evident options for security-sensitive applications: void-once-removed backing, destructible foils, and permanent-adhesive stainless. Application in IT asset security, calibration seals, and access-controlled equipment.
Void-on-removal
Facility asset programs
Multi-site industrial asset tag programs with standardized formats, per-site number ranges, consolidated reorders, and consistent turnaround. Currently supporting programs for utilities, contractors, manufacturers, and agricultural operators across the Western US.
Multi-site standard
Materials we engrave

Four substrates, one shop. Every material engraved in-house.

We run dedicated fiber laser and CO2 laser platforms in-house. Fiber laser marks anodized aluminum, brass, and stainless steel for the industrial environments where asset and equipment tags live; CO2 laser engraves two-ply engravable laminate for equipment panels and lower-cost programs. Four substrates, matched to your environment, mounting method, and facility standard at the quote stage.

4
Substrates engraved in-house. Fiber laser for metals. CO2 laser for laminate.
Anodized aluminum, brass, stainless steel, and two-ply engravable laminate — all engraved on dedicated in-house laser platforms. No outside vendors, no subcontracted work, no format drift between reorders. Consistent material, consistent turnaround, consistent quality.
✓
Anodized aluminum — the industrial standard
The primary substrate for asset tags and equipment nameplates. Anodized in black, red, blue, silver, and other finishes for legibility and durability. Ideal for data-field layouts, sequential numbering, and barcoded tags. Fiber laser marked in-house.
✓
Brass — permanent industrial ID
Naval brass and C260 cartridge brass for high-durability equipment identification, permanent installations, and applications where brass is the historical standard. Fiber laser marked in-house.
✓
Stainless steel — harsh environments
Laser-bonded marking on stainless steel for chemical wash-down, outdoor exposure, marine, food-processing, and other harsh environments where anodized aluminum and laminate don't survive. Fiber laser marked in-house.
✓
Two-ply engravable laminate
Colored cap layer over contrasting core — engraved to expose the core color. Cost-effective substrate for equipment panels, machine-mounted ID, and lower-volume tag programs. 28 stock color combinations. CO2 laser engraved in-house.
✓
Mounting: adhesive, drilled, riveted, stud-mount
Industrial-grade adhesive backing (3M-class), drilled and screwed, pop-riveted, stud-mounted, or plate-only. Any hole pattern, any mount configuration to match your installation method.
✓
Sizes, logos, and custom layouts
Any dimension, any layout, any hole pattern. Company logos, equipment manufacturer marks, department seals, and multi-field data plates engraved cleanly on all four substrates. MOQ = 1 for standard sizes and reorders.
Related guide
Not sure which material fits? Our engraving materials guide covers what each substrate suits, how it wears, and how to choose one for the environment the tag will live in.
Read the materials guide →
Formats and options

Every numbering, marking, and mounting option.

We've produced industrial identification for utilities, contractors, manufacturers, solar installers, and multi-site operators across the Western US since 1982. Below are the numbering, barcode, tamper, and mounting options that make up the full asset and equipment tag program — anything not listed, ask about it.

NUMBERED
Sequential serial numbering
Any starting number, any range, any increment, any prefix or suffix. Consistent numbering carried across every reorder — send us where you left off and we pick up on the same run. Standard for facility-wide asset programs and tool inventories.
BARCODE
Barcode and QR engraving
Code 39, Code 128, QR Code, and Data Matrix engraved directly into the substrate — not printed labels applied on top. Human-readable number and machine-scannable code paired on the same tag. Scan-compatible with standard asset management systems.
TAMPER
Tamper-evident options
Void-once-removed adhesive backing, destructible foil substrates, and permanent-adhesive stainless for IT asset security, calibration seals, and access-controlled equipment. Removal attempts leave visible evidence.
DATA
Equipment nameplate data fields
Multi-field layouts for manufacturer, model, serial, voltage, amperage, phase, capacity, weight, date of manufacture, and any additional data required. Send us your existing plate for a matching reorder, or your data schema for a new build.
MOUNT
Mounting configurations
Industrial adhesive back, drilled and screwed, pop-riveted, stud-mounted, or plate-only. Any hole pattern, any mount method. Specify installation surface (metal, plastic, rough concrete, outdoor exposure) and we recommend the mount.
LOGO
Logos and custom layouts
Company logos, equipment manufacturer marks, department seals, and complex multi-field layouts engraved cleanly. Send us your logo file or facility template — we match your exact standard on every reorder, across years and multi-site runs.
Industrial asset and equipment tags trusted by teams at
Frequently asked

Common questions on asset and equipment tags.

What materials do you make asset and equipment tags in?
Four substrates in-house: anodized aluminum (the industrial standard for asset tags and equipment nameplates — black, red, blue, silver and other anodized finishes), brass (naval and C260 cartridge for permanent industrial ID), stainless steel (laser-bonded marking for chemical wash-down, marine, food-processing, and other harsh environments), and two-ply engravable laminate (cost-effective substrate for equipment panels and lower-volume programs — 28 color combinations in stock). Fiber laser handles brass, aluminum, and stainless; CO2 laser handles engravable laminate. All engraved in-house in Chico.
Can you do sequential numbering?
Yes. Any starting number, any range, any increment, any prefix or suffix. Standard for facility-wide asset programs, tool crib inventories, calibration tag programs, and inspection tags. On reorders, tell us where you left off and we pick up the sequence — consistent numbering carried across years and multi-site runs. Send us your numbering scheme and quantity and we'll come back with pricing.
Can you engrave barcodes and QR codes?
Yes. Code 39, Code 128, QR Code, and Data Matrix engraved directly into the substrate — not printed labels applied on top of a blank tag. This is why barcoded engraved tags survive the environments that destroy printed barcode labels. Human-readable number and machine-scannable code paired on the same tag. Scan-compatible with standard asset management systems. Send us your data string requirement or your ERP's export format and we build to it.
What tamper-evident options are available?
Three main approaches: void-once-removed adhesive backing (leaves a visible "VOID" or checkerboard pattern behind on the mounting surface when removed), destructible foil substrates (the tag itself breaks apart on removal attempt), and permanent-adhesive stainless (physically difficult to remove intact). Applications include IT asset security, calibration seal programs, access-controlled equipment, and rental fleet ID. Send us your security requirement and we recommend the right approach.
Can you engrave equipment nameplates with data fields (voltage, model, serial)?
Yes. Multi-field equipment nameplate layouts are a core capability — manufacturer, model, serial, voltage, amperage, phase, capacity, weight, date of manufacture, and any additional data fields you require. Anodized aluminum is the standard substrate for equipment data plates; brass and stainless are also available. Send us your existing nameplate for a matching reorder, your data schema for a new build, or your OEM equipment spec sheet and we lay it out.
What's the difference between an asset tag and an equipment tag?
In common industrial usage, asset tags are for tracking and inventory (property ID numbers, barcoded tags for tools, IT equipment, furniture, vehicles) and equipment tags — often called equipment nameplates or machine ID plates — carry manufacturer and technical data (model, serial, voltage, capacity). We produce both. The right substrate, size, mounting method, and layout depends on what you're tracking or identifying, and what environment the tag lives in. Tell us the application and we'll recommend the format.
Can you match my facility's existing asset tag format?
Yes. Send us a photo, a sample tag, or your facility standard document. We match substrate, dimensions, anodize color, font, numbering scheme, barcode type, mounting method, and any logo requirements. Once your standard is on file, every reorder matches exactly — across sites and over years. Standard workflow for corporate facility asset programs and multi-site operators.
Do you handle multi-site or corporate facility asset programs?
Yes — multi-site industrial asset tag programs are a specialty. Standardized templates, per-site number ranges, consolidated billing, and consistent turnaround across every location. Currently supporting programs for utilities, contractors, manufacturers, solar installers, and agricultural operators across the Western US and nationwide.
What's the minimum order?
One. Order a single tag for one asset, one piece of equipment, or one machine — that's fine. Quantity discounts kick in on larger runs. Facility-wide rollouts and multi-site asset programs typically start at higher volumes but the shop is set up for any order size, including short-run reorders on established sequential number programs.
What's the lead time and how do I order?
Standard turnaround is 24–48 hours from proof approval. Same-day rush is available for time-critical work. Faster on request when it's a real emergency — call and ask. To order, send us your numbering scheme (or starting number and quantity), data field layout or existing sample, substrate preference, mounting method, and any facility standard. We come back with pricing and a proof for your approval before anything ships. Reorders match the approved layout already on file. All calls answered live, Monday through Friday, 8:30 AM to 5:00 PM PT.

Get your asset and equipment tag quote in one call.

Send us your numbering scheme, data field layout, mounting requirement, and any facility standard — or a sample of your existing tag for a matching reorder. We'll come back with pricing, material recommendations, and a proof for your approval. Reorders match the approved layout already on file.

Request a quote Call (530) 895-8448